Before I bought fiil wireless, the reason has been explained in the previous article, please don't Tucao.
After using this big ear of more than a thousand yuan, my colleagues said that I would also like to buy a fiil. However, I was stopped. I decided to start Sony 1abt with my lobbying, so I had this original, er......
The packaging design is relatively simple, positive and useful information is the nfc logo in the lower left corner, the Bluetooth logo, and Dafa's own gold standard certification.
The back is the detailed situation, the operation of the headset and the contents of the package.
I am a black controller. It's simply not resistant to this solid-color inner package, and it feels handsome!
Uncovering the lid is the body of the earphone. To say it is that the top cover of the box is also covered with a layer of sponge. The safety measures are done very well. The little card in the headset is a touch panel that teaches how to use the headset. For those of us who have used fiil wireless, it can be ignored.
The family outside the headset sent a headset bag, as well as a warranty card, 3.5mm audio cable, and charging cable.
It is worth mentioning that the 1abt audio cable is not the same as the 1a audio cable. It looks relatively cheap and relatively inexpensive.
The headset bag inside is double-layered, presumably to prevent the data cable and audio cable from scratching the earphone shell. The capacity is still large, but I feel that people who use this bag should not be too much. I feel a little cheap. I spend all my money on headphones. The fiil headphones also sent a soft shell carrying case. ......
The above figure and the following figure are all I use fiil wireless as a support for 1ABT shoot, so do not ask me what is below.
The functional area is centered on the left side of the headset. From the left to the right are the MIC, 3.5mm audio input interface, power button, and a power indicator that is not shown. The power indicator will flash in the on state, while the pairing will alternate between red and blue. Flash, basic Bluetooth headset is this routine.
It is worth mentioning that the 1abt earmuff sponge is specially designed to be thin and thick, effectively reducing the ear pressure, and being more suitable for long-time wear.
There is only one charging port on the right ear, outside it has protective measures, workmanship is not bad, embedded protection cover is very hidden, in the distance will not be found.
This angle is the maximum range of movement of the earmuff section.
1abt's head beam connection is a place I like very much. When the telescopic head beam is not pulled apart, the leather, plastic, and metal parts form a very design sense of harmony.
The head beam stretching part is composed of two layers of metal material sandwiched between plastics. After stretching, it can also be found that both the inner and outer sides of the supporting metal stretching parts are polished, and the touch feels very moist, without the kind of metal ice cold Feelings, the edges have also been dealt with and will not create a cut-off feeling.
Prior to buying Pioneer's Bluetooth headset, this place did not handle well, metal telescopic parts have a strong sense of cut. Unpacking:
The figure above is the connection of fiil wireless's head beam.
Sony 1abt and fiil wireless contrast, in fact, almost the size of the two earmuffs, but because of the fiil's designers from top to bottom the same barrel, so it seems stupid focus, in addition can also be found in the head beam fiil look more rigid. But fiil also has bright spots, well, that is, the two FIIL logos will shine...
After all, Sony is a veteran video maker, and confidently adapts the earmuffs to human ears. The oval earmuffs fit the contours of the ears. Fiil is a pretty round earmuff, relatively speaking, at least not making mistakes.
In addition, you can see the part of the sounding unit. Sony uses a material that resembles a chiffon. The unit can be seen with the naked eye. The personal feeling is that Dafa’s tuning book is biased towards low frequencies and the sound is heavier. Therefore, a tulle material with a more transparent sound is used.
FIIL uses a material similar to a sponge to cover the sounding unit. Personally feel that this kind of material can increase the amount of low frequency when the unit sounds. I do not know if the fiil is intentionally so designed, or because the effort in the tuning is less than the home, need to be done. Additional effort.
Finally attached to this one of the playing front ends used out of the box: Mountain Ling M1 out of the box
to sum up:
Sony SONY MDR-1ABT vs Wang Feng FIIL wireless:
advantage:
1, wear more comfortable.
2, the appearance of work more sophisticated.
3, the sound sound field is wider, bass is better.
Disadvantages:
1, the general quality of accessories.
2, no noise reduction.
3, there is no corresponding app compared to fiil.
4, no voice prompts, easy to automatically shut down when low battery.
5, will not shine!
in conclusion:
As a fungus, what can be clearly heard is that 1abt contrasts with Fiil, and it is obvious that there is Sony's tone, and the response to low frequencies is more adequate. When using fiil, the sound field is obviously compressed a lot more than 1abt. Attention is mainly focused on the rhythm of drums and the humongous sound of partial depressions. The other instrumental music is dull, while 1abt is the widest sound field to let people hear the rhythm of all instrumental music. The vocals are also obviously fuller than the fiil.
If it is a music enthusiast, buying a 1ABT is basically not wrong, but for the main listen to the popular, there are noise reduction, voice prompts and other functional needs of the user, fiil is also a good choice.
